Dog Care Stop Bark Collar AB01 User Manual

Product Overview

The Dog Care AB01 Bark Control Collar is a smart, easy-to-use device designed to help reduce excessive barking in dogs. It features two training modes—vibration mode and mild static mode—and is suitable for medium, large, and some small dogs (over 22 lbs). The collar is equipped with a sound-activated sensor that filters out external noises, ensuring it only responds to your dog’s barking. The LED indicator lights provide real-time feedback on the collar’s status, making it easy to monitor its operation.

---

Key Features

1. Two Anti-Bark Modes:

   • Vibration Mode: A gentle vibration is used to get your dog’s attention and discourage barking.

   • Mild Static Mode: A low-voltage static stimulation is used for more persistent barkers. The static intensity increases with each bark, up to 7 levels.

2. Smart Noise Filtering:

   • The collar’s sound-activated sensor filters out external noises, ensuring it only responds to your dog’s barking.

3. LED Indicator Lights:

   • The collar features 5 LED lights that indicate the working status and mode (blue for vibration mode, red for static mode).

4. Automatic Standby Mode:

   • The collar enters standby mode when no barking is detected, conserving battery life.

5. Sensitivity Adjustment:

   • The collar’s sensitivity can be adjusted to suit your dog’s size and barking habits.

---

Setting Up the Collar

1. Inserting Batteries:

   • The collar requires a 4LR44 6V battery. Insert the battery into the compartment on the back of the collar.

2. Fitting the Collar:

   • Ensure the collar is snug but not too tight. You should be able to fit one finger between the collar and your dog’s neck. The contact points must touch your dog’s skin for the collar to work effectively. If your dog has thick fur, you may need to trim the hair around the contact points.

3. Powering On:

   • Press the Power Switch for 3 seconds to turn on the collar. The LED lights will flash blue twice, indicating the collar is in vibration mode (default mode).

---

Training Modes

1. Vibration Mode:

   • In this mode, the collar vibrates and emits a beep-beep sound each time it detects barking. This mode is ideal for sensitive dogs.

2. Mild Static Mode:

   • In this mode, the collar delivers a low-voltage static stimulation that increases with each bark, up to 7 levels. The collar resets to the lowest level if your dog stops barking for 30 seconds.

---

Switching Modes and Adjusting Sensitivity

1. Switching Modes:

   • Press the Mode Button for 3 seconds to switch between vibration mode (blue LED) and static mode (red LED).

2. Adjusting Sensitivity:

   • Shortly press the Mode Button to adjust the sensitivity level (1-5). Start with level 1 and increase if necessary.

---

Training Tips

• Consistency is Key: Use the collar consistently to help your dog understand that barking leads to a correction.

• Positive Reinforcement: Reward your dog with treats or praise when they stop barking in response to the collar.

• Start Small: Begin with the lowest sensitivity level and gradually increase if necessary. Always observe your dog’s reaction to ensure they are comfortable.

• Avoid Overuse: Do not leave the collar on your dog for more than 12 hours at a time, as prolonged use can cause skin irritation.

---

Troubleshooting Common Issues

1. Collar Not Responding:

   • Ensure the battery is properly installed and fully charged. If the collar still doesn’t respond, replace the battery.

2. Collar Not Detecting Barking:

   • Check the fit of the collar and ensure the contact points are touching your dog’s skin. Trim any excess fur if necessary.

3. Collar Beeping or Vibrating Randomly:

   • Ensure the collar is not picking up external noises. Adjust the sensitivity level if needed.

4. LED Lights Flashing Continuously:

   • This may indicate a low battery. Replace the battery and check if the issue persists.

---

Important Safety Notes

• Do Not Use on Puppies: The collar is not recommended for dogs under 6 months old, pregnant dogs, or dogs with health issues.

• Avoid Over-Correction: Use the static stimulation mode sparingly and only when necessary. Always praise your dog for good behavior.

• Keep Away from Children: This training device should only be used by adults familiar with dog training techniques.

---

Maintenance and Care

• Weekly Cleaning: Clean the contact points with alcohol to ensure proper function. Check your dog’s neck for any signs of irritation or rash.

• Battery Replacement: Remove the battery when the collar is not in use to conserve power and prevent corrosion.

• Storage: Store the collar in a cool, dry place when not in use.

---

Final Thoughts

The Dog Care AB01 Bark Control Collar is a powerful tool for dog owners looking to manage excessive barking. With its two training modes, smart noise filtering, and easy-to-use design, it’s a versatile option for both indoor and outdoor use. Remember, the key to successful training is consistency, patience, and positive reinforcement. 

---

By following this guide, you’ll be well-equipped to use the Dog Care AB01 Bark Control Collar effectively and responsibly, ensuring a happy and well-trained dog.